Free Mar-2023 UPDATED HP HPE6-A72 Exam Questions & Answer
Latest Success Metrics For Actual HPE6-A72 Exam Realistic Dumps
The benefit in Obtaining the Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
This certification is an industry-recognized credential from Aruba Networks that assesses the applicant's understanding of fundamental concepts and skills on Aruba OS and the characteristics that exist on Cloud & Enterprise packages. When it comes to employment, this certification is a career game-changer that will advance you closer to achieving your dream profession.
Some more benefits are:
- Generate new leads and gain new projects
- Better Salary
- Demonstrate your involvement levels
HP HPE6-A72 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
How to schedule Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
To apply for the Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam, You have to follow these steps:
- Step 1: Go to the Aruba Certified Switching Associate (HP HPE6-A72) Professional Official Site. You must first create an account, use your email address to register. You must purchase your training through your local distributor. If you are a partner, you must first create an account on the Partner Portal. You must use your company email address to register.
- Step 2: Read the instruction Carefully
- Step 3: Follow the given steps
- Step 4: Apply for the Aruba Certified Switching Associate (HP HPE6-A72)-Professional Exam
For queries, contact your regional training team:
Get access to The Learning Center and get an HPE Learner ID. If this certification demands a written or online exam (HPE0 or HPE6 or HPE2), then generate a user profile with Pearson VUE, exam vendor for proctored/online exams. Practical exams are given through PSI or Aruba Education Services, consequently, no Pearson VUE user profile is needed.
NEW QUESTION 12
Match the switching term to the correct definition.
Answer:
Explanation:
NEW QUESTION 13
Which statement is true regarding modern switching requirements?
- A. While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
- B. Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs.
- C. Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.
- D. Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.
Answer: D
NEW QUESTION 14
Refer to the exhibit.
What commands will successfully enable the SVI for vlan 100 on interface 1/1/1 to produce the results displayed in the command show ip interface brief in the exhibit below?
- A. Access-1(config-if)# vlan 100
Access-1(config-vlan)# ip address 10.1.1.1/24 - B. Access-1(config)# interface 1/1/1
Access-1(config-if)# routing
Access-1(config-if)# interface vlan 100
Access-1(config-if-vlan)# ip address 10.1.1.1/24 - C. Access-1(config)# interface 1/1/1
Access-1(config-if)# vlan trunk permit vlan 100
Access-1(config-if)# interface vlan 100
Access-1(config-if-vlan)# ip address static 10.1.1.1/24 - D. Access-1(config)# interface vlan 100
Access-1(config-if-vlan)# ip address 10.1.1.1/24
Answer: D
NEW QUESTION 15
Which option correctly describes a WAN network?
- A. a group of computer resources that communicates between geographically separate location
- B. compute resources that are networked locally over wireless
- C. a network of devices over long distances but limited to within a single ISP
- D. the connection between two separate buildings in the same campus
Answer: A
NEW QUESTION 16
Refer to the exhibit
What is true regarding VLAN 50 according to the diagram above?
- A. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
- B. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
- C. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
- D. VLAN 50 was never added to the vlan-database and therefore is in a down state.
Answer: A
NEW QUESTION 17
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Using access control lists (ACLs) at the Core to improve performance
- B. Shifting endpoint access to the Aggregation layer from the Access layer
- C. Connecting WAN/MPLS and Data center access to the Aggregation layer
- D. Better Core router performance by offloading processing
Answer: D
NEW QUESTION 18
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. is an emerging satellite connection standard to allow wireless access anywhere in the world
- B. operates in both the 2.4GHz and 5GHz radios bands
- C. operates only in the 5GHz similar to 802.11ac
- D. allows transmissions of up to 4.8Gbps
- E. is the first WLAN standard to no longer use electromagnetic signals to transmit data
Answer: B,D
NEW QUESTION 19
Match each description to the correct term.
Answer:
Explanation:
NEW QUESTION 20
What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?
- A. copy running-config initial-checkpoint
- B. copy running-config checkpoint startup-config
- C. copy running-config default
- D. copy startup-config running-config
Answer: B
NEW QUESTION 21
What are two mechanisms supported on AOS-CX 6300 switches used in Multi-active Detection to determine the status of the Primary member? (Choose two.)
- A. BFD
- B. Peer switch-based detection
- C. Management interface split detection
- D. ARP-based
- E. Loopback keepalives
Answer: C,D
NEW QUESTION 22
Refer to the exhibit
Which command on Access-2 port 1/1/4 will enable connectivity between PC-1 and Server-1 without any routing enabled in the network?
- A. Access-2 (config-if-1/1/4)# vlan access 1, 10, 20, 255
- B. Access-2 (config-if-1/1/4)# vlan access 20
- C. Access-2 (config-if-1/1/4)# vlan 20 untag 1/1/4
- D. Access-2 (config-if-1/1/4)# vlan trunk allow 1, 10, 255
Answer: B
NEW QUESTION 23
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: D
NEW QUESTION 24
The customer has 778 developers testing computer games on the network.
Which two actions resolve Broadcast storms? (Choose two.)
- A. Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
- B. Utilize Spanning Tree to dynamically disable all redundant links in a segment.
- C. Manually disable the redundant link to immediately resolve the impacted portion of the network.
- D. Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
- E. Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
Answer: B,C
NEW QUESTION 25
What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?
- A. Login admin and password password.
- B. Login admin and password forgetme!
- C. Login admin and password admin.
- D. Login admin and password field empty.
Answer: D
NEW QUESTION 26
Which switch supports a maximum of 8 line-cards, 3 fabric modules, and 2 management cards?
- A. Aruba 8408
- B. Aruba 6410
- C. Aruba 8400
- D. Aruba 5412r
Answer: C
NEW QUESTION 27
Match the terms to the correct layer of the OSI model.
Answer:
Explanation:
NEW QUESTION 28
Review the exhibit.
As the frame traverses from **PC-1** to **Server-1**, the VLAN tag will be removed.
Click on the interface (circled in green) where the VLAN tag will be removed.
Answer:
Explanation:
NEW QUESTION 29
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
- A. boot system secondary 10
- B. checkpoint auto 10
- C. checkpoint auto confirm 10
- D. checkpoint rollback 10
Answer: B
NEW QUESTION 30
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization. What command should be used to enable terminal output line by line or page by page?
- A. The command more
- B. The command terminal length 30
- C. The command less
- D. The command page
Answer: D
NEW QUESTION 31
What is the correct description of a Multi-Layer Switch?
- A. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
- B. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
- C. any switch that supports PoE, LLDP-MED and Flow Control
- D. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
Answer: D
NEW QUESTION 32
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. is an emerging satellite connection standard to allow wireless access anywhere in the world
- B. operates in both the 2.4GHz and 5GHz radios bands
- C. operates only in the 5GHz similar to 802.11ac
- D. allows transmissions of up to 4.8Gbps
- E. is the first WLAN standard to no longer use electromagnetic signals to transmit data
Answer: B,D
Explanation:
Explanation/Reference:
NEW QUESTION 33
Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?
- A. show vlan 1111
- B. show interface vlan 1111
- C. show interface gigabit 1/1/1
- D. show interface 1/1/1
Answer: D
NEW QUESTION 34
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION 35
The following command is issued:
Switch# checkpoint rollback start
What is the result?
- A. The switch will use the checkpoint 'rollback1 as the starting configuration on next reboot.
- B. The command will fail because rollback commands must be issued from global-config mode.
- C. The switch will revert the running-configuration to the checkpoint called 'start1 without a reboot.
- D. The command will fail because it is incomplete.
Answer: C
NEW QUESTION 36
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION 37
......
Updated HPE6-A72 Dumps Questions For HP Exam: https://latestdumps.actual4exams.com/HPE6-A72-real-braindumps.html